>Gallery >Shopping >Wooden Legs >European Beech Timber Bun Feet 43mm x 85mm  
 
 
 

Categories

Featured

 
 

European Beech Timber Bun Feet 43mm x 85mm

 

European Beech Timber Bun Feet 43mm x 85mm
European Beech Timber Bun Feet 43mm x 85mm for chairs and sofa's from Furnacc NZ. Top quality solid European Beech timber. Available in Mahogany finish, Natural Gloss and Raw Unfinished. Includes M8 T/nut. Price for sets of 4. Click on OPTION (circles) below for prices.
Each
3
In Stock
Purchase Qty:
 

Classic round bun foot at 85mm diameter suitable for lounge suite chairs and sofas.  Timber is tight grained European Beech and available in Mahogany Polish, Natural Gloss or Raw Unfinished.  Height is 43mm including the 3mm x 18mm chrome plated dome on the base.  Fitting is by threaded bolt already inserted through the centre of the wooden foot for greater strength.  The thread diameter of the bolt is Metric 8mm (m8) and is 30mm long.  An m8 Insert Scew ris supplied with each leg supplied.  This is the strongest fitting available for New Zealand soft timber frames.  The drill size for the wooden frame to fit these 8mm Insert Screws is 10mm and the hole should be at least 32mm deep to permit clearance of the threaded bolt inside the frame. The Insert Screw is wound into the prepared hole by use of an 8mm diameter Allen Key or a 5mm Flat Bladed screwdriver will suffice. The threaded bolt should then be easily wound into the fitted Insert Nut for a secure and stable result.

Genuine European Beech timber

Attractive tight grain of the Beech timber is hard-wearing

Threaded bolt inserted the fulll length of the leg for strength

Heavy duty m8 threaded bolt with 30mm extended length for strong fitting

Protective plastic sleeve over threaded bolt

Individually wrapped

 Timber  Shape  Height  Diameter  Leg Fitting  Fitting for Frame

 European Beech

 Round Bun Foot

 43mm

(includes 3mm x 18mm dome on base)

 85mm

 m8 x 30mm threaded bolt

(factory fitted)

 m8 Insert Nut

(supplied loose)

Each leg has the m8 (metric 8mm) threaded bolt factory fitted.  Each threaded bolt is shrouded in a plastic sleeve to help prevent damage to other legs in transit.  Each wooden leg is individually wrapped in bubble wrap to help prevent damage during transit.  M8 Insert Nuts for fitting to the wooden underside of chair or sofa frame are packed separately in a polybag inside the carton.  Check for these before throwing out the packaging. All legs are supplied inside strong cardboard packaging.

Wish to view the full range - Visit our Shopping Cart

 

Best Sellers

New

 
 
 

© Copyright 2024 Furniture Components 2014 (NZ) Ltd