Twin slat holder accepts 2 x 38mm wide flexible slats. Slat lengths available are 775mm and 915mm. 14 flexible slats will be required for the 14 available slat holders. You can cut these to length to suit.
This model slat holder is designed to sit on a wooden cleat - usually 30mm wide by 70mm deep - and is screwed into the side of the timber cleat. However depending on the thickness of the bed frame side panel it may be possible to locate these slat holders on the side panel itself. Three (3) 4mm diameter holes in the fixing plate are available for fixing the slat holder. Each slat holder can be separated by 150mm at the fixing centre position down the length of the frame. Lay the work out first before proceeding to spread the slats evenly across the frame.
Overall width of slat holder is 110mm
Depth of slat holder is 32mm
Internal depth of slat holder cavity is 28mm
Width of internal slat cavity is 38mm
Accepts flexible slats up to 8mm thick
Slats are centred at 64mm when fitted to slat holder
Depth of ledge portion of slat holder is 17mm
Distance from top of slat holder to centre of hole fixing is 40mm
Fixing plate width is 80mm (at max) by 18mm deep