>Gallery >Shopping >Bed Slats >Tensioner Slat Kits  




Tensioner Slat Kits


Tensioner Slat Kits
Tensioner Slat Kits from Furnacc. Easily strengthen the existing flexible slats on your slat bed. Each kit consists of 5 thin 6mm flexible slats and 10 plastic tension adjusters. This is sufficient to fit to 5 rows on one side of one bed. Widths available are 53mm and 38mm for all bed sizes. Click on 'Pricing' tab (below) for prices.
In Stock
Purchase Qty:

A slat tensioner kit enables five rows of existing flexible slats to be strengthened in order to cope with heavier body weights or provide additional support where needed.   A tensioner kit can be retrofitted to an existing flexible slat bed.  If more, or less, than 5 rows are required then the components can be ordered individually.  Five rows per side of bed is usually sufficient.  This allows for 2 rows beneath the shoulders and 3 rows beneath the hips.  If total support for heavier body weights is required then all rows on one side, or both sides, can be retrofitted.  This will increase the body loading capacity by approximately 50%.  

The concept of a tensioner kit is to 'double-up' flexible slats by positioning a thinner 6mm thick tension slat beneath an existing flexible slat of the same width.  The design of the plastic tension adjuster is such that they will accept a combined slat thickness of the 2 'doubled-up' slats of between 14mm and 17mm.  This offers the opportunity to fit combinations of 8mm/6mm, 9mm/6mm, 10mm/6mm or 11mm/6mm.  On each row fit 1 x tensioner slat and 2 plastic tension adjusters.  Each tension adjuster can slide inwards and outwards.  This allows each row to be individually adjusted for tension and more or less comfort as required.  The direction for sliding is marked clearly on the top of each tension adjuster in English.  Both tension slats and plastic tension adjusters are manufactured in Europe.  Pushing the pair of sliders together towards the centre SOFTENS the support whilst pulling them apart HARDENS the firmness.

Two widths of slats are catered for.  53mm wide and 38mm wide.  Two lengths of each width are available.  600mm and 700mm.  Tension slats are slightly curved in an 'arc' to match the curve of the original flexible slats on your bed.  Suitable usage is as follows:

600mm - Queen size

700mm - King, Super King & King Single

Depending on the method of bed construction sometimes a 600mm length will be sufficient for a King Size bed.  This can be checked before ordering.  Note also that it is easy to cut a 700mm length down to shorten it if a 700mm is too long.

Due to the narrow size of Single and Double beds it is normally of no advantage to incorporate slat tensioner kits.  However it can be done if required as each tension slat is easily cut to size.  This may be useful when outfitting caravans or campervans or similar.

Suitable flexible slats for new build furniture are also available on this website.

European manufactured Beech laminated flexible slats

European manufactured plastic Tensioner Sliders

Available for 53mm and 38mm wide flexible slats

Easily retrofitted to existing flexible slat systems

Each row individually adjustable for firmness

Five (5) Tensioner slats per kit

Ten (10) plastic Tension Sliders per kit

Slat widths are 53mm or 38mm

Slat lengths are 600mm or 700mm

Tensioner slats are 6mm thick

Combination of existing Flexible slat and Tensioner slat can be between 14mm and 17mm

600mm length is for Queen size beds

700mm length are for King, Super King & King Single size beds

The five (5) tensioner slats and ten (10) plastic tension sliders are packed in one pack.  The complete kit is wrapped in polybubble and proteced with corrugated cardboard.

  • Tension Slats for Flexible Slat Beds
    NZ$ 0.00 - 3.75
    View / Add
  • Wooden Bed Slats 775mm long
    NZ$ 0.00 - 88.50
    View / Add
  • Frame Bed Curved Slats 915mm Long
    NZ$ 0.00 - 109.50
    View / Add
  • Bed Slat Pack 63mm & Holders
    NZ$ 86.00 Pack
    NZ$ 98.90 incl GST
    View / Add

Wish to view the full range - Visit our Shopping Cart


Best Sellers



© Copyright 2021 Furniture Accessories Ltd