Frequently used on imported metal framed beds, divans or futons. Suits 20mm x 20mm steel tube frames. This slat support accepts slats 53-55mm wide and up to 9mm thick. Check the pin positioning carefully as there are two similar versions of this slat support available. The SC55MF7.5 measures 7.5mm from the front of the housing to the centre of the pin. Also see item SC60MF15. The distance of the pins to the inside edge of the slat holder is critical. On the SC55MF7.5 this distance is 7.5mm from the inside edge to the pin centre. See "Specifications" tab for all dimensions.
Slat Supports are also known as a Slat Cap; Flexible Slat Holder; Slat Shoe; Slat Pocket; Bed Support; Bed Holder and Bed End Cap.
Slat Support Width 60mm
Slat Support Depth 50mm
Slat Support Height 13mm
Distance between the centre of both pins is 40mm
Distance from front edge to centre of pin 7.5mm
Suits slat thickness up to 9mm
Pin diameter 8mm (at widest point)