> Gallery > Shopping > Bed Slat Holders > Bed Slat Holders  
 
 
 

Categories

Featured

 
 

Bed Slat Holders

 

Plastic Slat Holders for 38mm, 53mm & 63mm Wide Flexible Slats
Sort By
  • 38mm Plastic Slat Pockets
    Bed frame parts including 38mm plastic pocket spare parts for beds with flexible wooden slats fitted are available from Furnacc. Specialty 38mm twin-slat system bed holders and slat caps are from our on-line store. Fixing Pins included.
    NZ$ 5.50 Set
    NZ$ 6.33 incl GST
    941 in stock
    In Stock
  • Replacement Bed Slat Holder - 53mm for wooden frames
    Replacement bed slat holder for your King Single, Double, Queen or King size slat bed base. The Furnacc range of flexible slat bed supports fit most wooden slat beds. Fixing Pins included.
    NZ$ 4.64 Each
    NZ$ 5.34 incl GST
    1000 in stock
    In Stock
  • Design Mobel EVO Slat Holder 50mm

    Design Mobel EVO Slat Holder 50mm. Original slat holder fitting for DML (Design Mobel) bed frames. Fits 53mm wide slats. Evo Pins for horizontal fitting on selected DM bed frames available as an extra. 2 required per Slat Holder. Colour sky blue. Also known as DM, Design Mobel, Evo slat shoe, Evo slat system

    NZ$ 5.04 Each
    NZ$ 5.79 incl GST
    370 in stock
    In Stock
  • Design Mobel EVO Slat Holder 50mm + PINS
    Design Mobel EVO Slat Holder 50mm + PINS
    NZ$ 5.75
    NZ$ 6.61 incl GST
    35 in stock
    In Stock
  • EVO 50mm Slat Holder for DML Bed Frames - Grey + PINS

    Design Mobel EVO Slat Holder 50mm including 2 pins. Fits 53mm wide slats. Original slat holder fitting for DML (Design Mobel) bed frames. Colour Grey. Also known as DM, Design Mobel, Evo slat shoe, Evo slat system. We Export to Australia.

    NZ$ 5.75 Each
    NZ$ 6.61 incl GST
    1254 in stock
    In Stock
  • EVO 38 x 38mm Slat Holder for DML Bed Frames - Grey + PINS
    Design Mobel EVO Slat Holder Twin 38mm/38mm including 2 pins. Original slat holder fitting for DML (Design Mobel) bed frames. Colour Grey.

    Also known as DM, Design Mobel, Evo slat shoe, Evo slat system
    NZ$ 4.50 Each
    NZ$ 5.18 incl GST
    325 in stock
    In Stock
  • EVO Pin for DML Slat Holders
    EVO Pin for DML Slat Holders. Clips on to Design Mobel Slat Holders. Two required per slat holder,
    NZ$ 0.96 Each
    NZ$ 1.10 incl GST
    450 in stock
    In Stock
  • Plastic Bed Slat Holder - 53mm for wooden frames
    Plastic bed slat holder 53mm for wooden frames available from Furnacc. Top fitting twin pin bed slat support for flexible slat bed bases. Pin spacings are 32mm apart (see note below). Colour brown.
    NZ$ 1.77 Each
    NZ$ 2.04 incl GST
    6524 in stock
  • Continuous Slat Holder Strip 53mm
    Continuous Slat Holder Strip for 53mm flexible slats is a simple method of fitting slat holders to a timber bed side-rail. Each strip contains 19 pockets. One strip required per side for single/king size and four strips for double/queen/king etc. Two fitting systems. See 'information' and 'specification' tabs. Quantity break for 4+ strips.
    222 in stock
    In Stock
  • Slat Plastic Pocket 53mm Top Fitting
    Slat Plastic Pocket 53mm Top Fitting for 53mm wide flexible slats. Single Pin fits into the frame or wooden cleat from the top. Has curved base permitting backwards and forwards movement. Made in Europe from virgin plastic. Dark green in colour.
    NZ$ 4.00 Each
    NZ$ 4.60 incl GST
    1068 in stock
    In stock
  • Staple/Screw-on 53mm Slat Holder
    Staple/Screw-on 53mm Slat Holder. This is the simplest slat holder to apply for 53mm wide flexible slats. Simply place the flange over the timber bed rail and staple-on, screw-in or nail-on using short large head nails (clouts). Quantity breaks for 30+ and 60+ pieces.
    NZ$ 3.20 Each
    NZ$ 3.68 incl GST
    41 in stock
    In Stock
  • Slat Holder 55mm for Metal Frame

    Slat Holder 55mm for Metal Frame. Colour grey blue. Top Fixing slat holder for 53mm wide flexible slats with two pins at 38mm pin centres designed with expanding tabs for fitting to square and rectangular tubular frames. Quantity breaks for 30+ and 60+ units.

    NZ$ 1.77 Each
    NZ$ 2.04 incl GST
    942 in stock
    In Stock
  • DM Single Slat Holder 50mm
    DM Single Slat Holder 50mm including 2 pins. Designed for selected DM (Design Mobel) bed frames to accept 1 x 50mm x 9mm flexible slats. Pins fit horizontally (sideways) into a pre-drilled wooden cleat. Colour Blue.

    Also known as DM, Design Mobel, Standard Slat System
    NZ$ 6.67 Each
    NZ$ 7.67 incl GST
    176 in stock
    In Stock
  • Slat Holder DM Twin 38mm
    Slat Holder DM Twin 38mm including 2 pins. Original slat holder on DM (Design Mobel) slat bed frames designed for heavier body weights (>100kg). Designed to accept 2 x 38mm x 9mm flexible slats in tandem. Two slat holders and two flexible slats per row. Colour blue

    Also known as DM, Design Mobel, Deluxe Slat System.
    NZ$ 5.01 Each
    NZ$ 5.76 incl GST
    229 in stock
    In Stock
  • PIN for Slat Holder

    Pins for slat holders on slatted bed frames available on-line from Furnacc. Should you require spare pins or need replacements for existing slat holders then the PLSSPINBLK will fit many side-fitting slat shoes.

    NZ$ 0.96 Each
    NZ$ 1.10 incl GST
    In Stock
  • Pins for Slat Holders
    Pins for Slat Holders
    NZ$ 1.20 Each
    NZ$ 0.90 Each
    NZ$ 1.04 incl GST
    In Stock
    In Stock
  • Slat Bed Plastic Fitting 53mm Grey
    Slat Bed Plastic Fitting 53mm from Furnacc. Top fitting single pin bed slat support for flexible slat bed bases. Easy to fit. Colour CHARCOAL GREY. Minimum buy is 1 or buy a bed set of 60 or more. Bed lot prices for 15+, 30+ and 60+ slat holders available.
    NZ$ 4.00 Each
    NZ$ 4.60 incl GST
    923 in stock
    In Stock
  • Slat Holder Single Pin 53mm Ivory
    Slat Holder Single Pin 53mm Ivory colour from Furnacc. Classic top fitting slat holder for 53mm wide slats. Requires a single drill hole in a wooden bed side frame or internal timber cleat.
    NZ$ 4.00 Each
    NZ$ 4.60 incl GST
    66 in stock
    In Stock
  • OKOOKO Slat Holder 53mm Single Pin
    OKOOKO Slat Holder 53mm Top Fitting Single Pin. Branded slat holder 'Okooko' no longer sold in New Zealand. Brand new - never used. Colour gunmetal grey. Special Price 60+ units.
    NZ$ 4.00 Each
    NZ$ 4.60 incl GST
    351 in stock
    In Stock
  • Slat Holder 63mm Brown
    Slat Holder 63mm Dark Brown designed for the wider flexible slat. Will accept flexible slats from 8mm to 12mm thick. Suitable for timber or metal frames. Pin centres are at 38mm spacing which is the critical measurement.
    NZ$ 3.40 Each
    NZ$ 3.91 incl GST
    771 in stock
    In Stock

Wish to view the full range - Visit our Shopping Cart

 

Best Sellers

New

 
 
 

© Copyright 2024 Furniture Components 2014 (NZ) Ltd