>Gallery >Shopping >Bed Slat Holders >Bed Slat Holders >Replacement Bed Slat Holder - 53mm for wooden frames  
 
 
 

Categories

Featured

 
 

Replacement Bed Slat Holder - 53mm for wooden frames

 

Replacement Bed Slat Holder - 53mm for wooden frames
Replacement bed slat holder for your King Single, Double, Queen or King size slat bed base. The Furnacc range of flexible slat bed supports fit most wooden slat beds. Fixing Pins included.
Price:
NZ$ 4.35 excluding GST
 
NZ$ 5.00 including GST
Price for 10+:
NZ$ 4.10 per Each
Price for 30+:
NZ$ 3.90 per Each
Price for 60+:
NZ$ 3.35 per Each
Each
PLSS55+PINS
129
In Stock
Purchase Qty:
 

The superb flexibility of the PLSS55+PINS bed base slat holder offers ease of assembly and great comfort during use.  PLSS55+PINS is a European styled traditional side-mounted slat holder for 53mm wide slats.  Extremely flexible rubber-like plastic pockets are mounted into the bed frame by the use of two pins (supplied).  The natural spring of the flexible slat in conjunction with the PLSS55+PINS flexible slat holder offers maximum comfort and support.

Each slat holder is supplied with two pins which usually locate into 10mm holes drilled into a wooden cleat running along the inside of a flexible slat bed side rail.  Slat holders are generally drilled at 64mm centres for the pins and positioned 130mm centres apart.  Wider beds such as Double, Queen, King or Super King require a centre rail to which the middle flexible caps are positioned back to back with a 5-10mm separation between them.  The slat combinations can be 13, 14 or 15 rows each side thereby requiring 52, 56 or 60 slat holders for the wider beds. Slat holder pins - 2 per slat cap - are included in the price of each slat shoe.  Colour is Midnight Blue  Need more than 60 pieces - contact us using the 'Product Enquiry' tab.

 Slat Holders are also known as a Flexible Slat Cap; Slat Pocket; Rubber Holder; Bed End Cap; Plastic Cap; Slat Support; Slat Boot; Bed Base Holder or Flexible Slat Shoe.

  • Traditional European design for 53mm wide slats
  • Frequently used in flexible slat bed manufacture
  • Brand new highly flexible synthetic rubber material
  • Plastic is S rubber standard material 63 shore (hardness grade)
  • Dimension 'A' in the diagram is 53mm
  • Dimension 'B' in the diagram is 8.5mm
  • Dimension 'C' in the diagram is 32mm
  • Cleat hole is 10mm diameter and cleat hole depth is 15mm
  • Cleat holes are drilled at 64mm centres
  • Slat holders are usually positioned 130mm apart
  • Enquire at info@furnacc.com for more information on the technical properties of S-rubber

Each set consists of 1 x PLSS55 Slat holder and 2 x PIN1226 Black Slat Holder Pins.  Minimum sale is 2 sets (2 slat holders, 4 pins). Quantity breaks available for 30+ sets and 60+ sets.  Need more slat holders contact us through the enquiry tab at info@furnacc.com.

Wish to view the full range - Visit our Shopping Cart

 

Best Sellers

New

 
 
 

© Copyright 2024 Furniture Components 2014 (NZ) Ltd