The black colour on this enamel nail is known as 'Jet Black'. As a note of caution it is difficult to photographically reproduce the exact same colour on a small website image. Also every individual PC screen is set up for colour differently. The finish on the Jet Black nail head is baked enamel with the colours specified under the RAL system for paint and coatings. You can inspect the RAL colour for Jet Black by going to the following website link.
Once viewed you can return to the Furnacc website by use of the ← ← (reverse arrows) near the top of your webpage.
There is no exact equivalent to RAL Jet Black in the Pantone range as Pantone applies to printing and other types of media and not paint & coatings. However as a guide the nearest Pantone colour to RAL 9005 is Pantone Neutral Black C.
Note: There may also be slight variances in colour between different batches of the same colour enameled nails for which we cannot accept any responsibility. However wherever practical we will endeavour to draw the stock for each order from the same packet.
FASTENING NAILS - To avoid damage to the enamel it is recommended that a soft face hammer (nylon tipped or felt/cloth covered steel head) be used when driving these nails into timber. Extreme hardwood timbers may require a fine pilot hole to be pre-drilled to avoid bending the shank or distorting the nail head. Furnacc cannot be responsible for the application of these decorative nails.
Head diameter 11.0mm
Jet Black RAL 9005
Sold in multiples of packs of 10