A slat end cap frequently used on imported metal framed beds, divans, futons or pull-out style sofa bed frames where 2 or 3 sections of slats nest and are pulled out concertina-style to open. Suits both 30mm x 20mm (rectangular) and 30mm x 30mm (square) steel tube frames. This slat holder accepts slats 53-55mm wide and up to 9mm thick. Check the pin positioning carefully as there are two similar versions of this slat holder available. The SC60MF15 measures 15mm from the front of the housing to the centre of the pin. Also see item SC55MF7.5. There are several versions of this slat holder in use on the market. The distance of the pins to the inside edge of the slat holder is critical. On the SC60MF15 this distance is 15mm from the inside edge to the pin centre. Check dimensions carefully. See "Specifications" tab for all dimensions.
Slat Caps are also known as a Slat Support; Flexible Slat Holder; Slat Shoe; Slat Pocket; Bed Support; Bed Holder and Bed End Cap.
Cap Width 60mm
Cap Depth 60mm
Cap Height 13mm
Distance between the centre of both pins is 40mm
Distance from front edge to centre of pin 15mm
Suits slat thickness up to 9mm
Pin diameter 8mm (at widest point)