> Gallery > Shopping > Nails > Nails Enamelled > Upholstery Pins BROWN 11.0mm  
 
 
 

Categories

Featured

 
 

Upholstery Pins BROWN 11.0mm

 

Upholstery Pins BROWN 11.0mm
Upholstery Pins BROWN ENAMEL for upholstery. Enhance the appearance of your chairs and sofa's with the addition of colour upholstery pins. Head size is 11.0mm and shank length is 13mm. Other colours available. Pack size is multiples of Packs of 10. Price is per EACH.
Also known as: upholstery tacks; brown upholstery nails; brown nailheads; decorative tacks & furniture nails.
Price:
NZ$ 0.33 excluding GST
 
NZ$ 0.38 including GST
Price for 50+:
NZ$ 0.30 per Each
Price for 100+:
NZ$ 0.26 per Each
Each
10
UPNFBROWN
1000
In Stock
Purchase Qty:
 

The brown colour on this enamel nail is known as 'Mahogany Brown'.  As a note of caution it is difficult to photographically reproduce the exact same colour on a small website image.  Also every individual PC screen is set up for colour differently. The finish on the Mahogany Brown nail head is baked enamel with the colours specified under the RAL system for paint and coatings.  You can inspect the RAL colour for Mahogany Brown by going to the following website link.

http://ralcolor.net/ral-8016-mahogany-brown.php

Once viewed you can return to the Furnacc website by use of the ← ← (reverse arrows) near the top of your webpage.

There is no exact equivalent to RAL Mahogany Brown in the Pantone range as Pantone applies to printing and other types of media and not paint & coatings.   However as a guide the nearest Pantone colour to RAL 8016 is Pantone Solid Colour 4625 C.

Note: There may also be slight variances in colour between different batches of the same colour enameled nails for which we cannot accept any responsibility.  However wherever practical we will endeavour to draw the stock for each order from the same packet.

FASTENING NAILS - To avoid damage to the enamel it is recommended that a soft face hammer (nylon tipped or felt/cloth covered steel head) be used when driving these nails into timber.  Extreme hardwood timbers may require a fine pilot hole to be pre-drilled to avoid bending the shank or distorting the nail head. Furnacc cannot be responsible for the application of these decorative nails.

Mid-tone brown

Strong construction

13mm (1/2") shank

Baked enamel surface

Head diameter 11.0mm

Shank length 13mm

Mahogany Brown RAL 8016

Sold in multiples of packs of 10

Wish to view the full range - Visit our Shopping Cart

 

Best Sellers

New

 
 
 

© Copyright 2024 Furniture Components 2014 (NZ) Ltd