Featured

Bed Slat Holders

Plastic Slat Holders for 38mm, 53mm & 63mm Wide Flexible Slats

38mm Plastic Slat Pockets

Bed frame parts including 38mm plastic pocket spare parts for beds with flexible wooden slats fitted are available from Furnacc. Specialty 38mm twin-slat system bed holders and slat caps are from our on-line store. Fixing Pins included.

NZ$ 4.90 Set
NZ$ 4.00 Set
NZ$ 4.60 incl GST

639 in stock

In Stock
Replacement Bed Slat Holder - 53mm for wooden frames

Replacement bed slat holder for your King Single, Double, Queen or King size slat bed base. The Furnacc range of flexible slat bed supports fit most wooden slat beds. Fixing Pins included.

NZ$ 4.35 Each
NZ$ 5.00 incl GST

273 in stock

In Stock
Plastic Bed Slat Holder - 53mm for wooden frames

Plastic bed slat holder 53mm for wooden frames available from Furnacc. Top fitting twin pin bed slat support for flexible slat bed bases. Pin spacings are 32mm apart (see note below). Colour brown. Buy 1 or buy 1,000. Volume prices for 30+ and 60+ slat holders.

NZ$ 2.60 Each
NZ$ 2.20 Each
NZ$ 2.53 incl GST

373 in stock

In stock
Continuous Slat Holder Strip 53mm

Continuous Slat Holder Strip for 53mm flexible slats is a simple method of fitting slat holders to a timber bed side-rail. Each strip contains 19 pockets. One strip required per side for single/king size and four strips for double/queen/king etc. Two fitting systems. See 'information' and 'specification' tabs. Quantity break for 4+ strips.

NZ$ 32.15 Each
NZ$ 36.97 incl GST

94 in stock

In Stock
Slat Plastic Pocket 53mm Top Fitting

Slat Plastic Pocket 53mm Top Fitting for 53mm wide flexible slats. Single Pin fits into the frame or wooden cleat from the top. Has curved base permitting backwards and forwards movement. Made in Europe from virgin plastic. Dark green in colour.

NZ$ 4.00 Each
NZ$ 2.50 Each
NZ$ 2.88 incl GST

80 in stock

In stock
Staple/Screw-on 53mm Slat Holder

Staple/Screw-on 53mm Slat Holder. This is the simplest slat holder to apply for 53mm wide flexible slats. Simply place the flange over the timber bed rail and staple-on, screw-in or nail-on using short large head nails (clouts). Quantity breaks for 30+ and 60+ pieces.

NZ$ 3.00 Each
NZ$ 3.45 incl GST

48 in stock

In Stock
Slat Holder 55mm for Metal Frame

Slat Holder 55mm for Metal Frame. Colour grey blue. Top Fixing slat holder for 53mm wide flexible slats with two pins at 38mm pin centres designed with expanding tabs for fitting to square and rectangular tubular frames. Quantity breaks for 30+ and 60+ units.

NZ$ 4.00 Each
NZ$ 4.60 incl GST

132 in stock

In Stock
Design Mobel EVO Slat Holder 50mm

Design Mobel EVO Slat Holder 50mm including 2 pins. Original slat holder fitting for DM (Design Mobel) bed frames. Comes complete with 2 pins for horizontal fitting on selected DM bed frames. Pin holes are at 64mm centres. Slat Holder snaps closed over pins for easy assembly. Colour sky blue.

Also known as DM, Design Mobel, Evo slat shoe, Evo slat system

NZ$ 5.00 Each
NZ$ 5.75 incl GST

44 in stock

In Stock
Design Mobel EVO Slat Holder 38/38mm

Design Mobel EVO Slat Holder 38/38mm including 2 pins. Original twin slat holder fitting for 38mm wide slats on DM (Design Mobel) bed frames. Comes complete with 2 pins for horizontal fitting on selected DM bed frames. Pin holes are at 64mm centres. Slat Holder snaps closed over pins for easy assembly. Colour sky blue.

Also known as DM, DML, Evo slat shoe, Evo slat system

NZ$ 7.50 Each
NZ$ 8.63 incl GST

Low Stock
DM Single Slat Holder 50mm

DM Single Slat Holder 50mm including 2 pins. Designed for selected DM (Design Mobel) bed frames to accept 1 x 50mm x 9mm flexible slats. Pins fit horizontally (sideways) into a pre-drilled wooden cleat. Colour Blue.

Also known as DM, Design Mobel, Standard Slat System

NZ$ 3.00 Each
NZ$ 3.45 incl GST

91 in stock

In Stock
Slat Holder DM Twin 38mm

Slat Holder DM Twin 38mm including 2 pins. Original slat holder on DM (Design Mobel) slat bed frames designed for heavier body weights (>100kg). Designed to accept 2 x 38mm x 9mm flexible slats in tandem. Two slat holders and two flexible slats per row. Colour blue

Also known as DM, Design Mobel, Deluxe Slat System.

NZ$ 5.00 Each
NZ$ 5.75 incl GST

116 in stock

In Stock
PIN for Slat Holder

Pins for slat holders on slatted bed frames available on-line from Furnacc. Should you require spare pins or need replacements for existing slat holders then the PIN1226 will fit many side-fitting slat shoes.

NZ$ 0.90 Each
NZ$ 1.04 incl GST

In Stock
Pins for Slat Holders

Pins for Slat Holders

NZ$ 1.20 Each
NZ$ 0.90 Each
NZ$ 1.04 incl GST

In Stock

In Stock
Slat Bed Plastic Fitting 53mm Grey

Slat Bed Plastic Fitting 53mm from Furnacc. Top fitting single pin bed slat support for flexible slat bed bases. Easy to fit. Colour CHARCOAL GREY. Minimum buy is 1 or buy a bed set of 60 or more. Bed lot prices for 15+, 30+ and 60+ slat holders available.

NZ$ 4.00 Each
NZ$ 4.60 incl GST

117 in stock

In Stock
Slat Holder Single Pin 53mm Ivory

Slat Holder Single Pin 53mm Ivory colour from Furnacc. Classic top fitting slat holder for 53mm wide slats. Requires a single drill hole in a wooden bed side frame or internal timber cleat.

NZ$ 4.00 Each
NZ$ 4.60 incl GST

77 in stock

In Stock
Slat Holder 63mm Brown

Slat Holder 63mm Dark Brown designed for the wider flexible slat. Will accept flexible slats from 8mm to 12mm thick. Suitable for timber or metal frames. Pin centres are at 38mm spacing which is the critical measurement.

NZ$ 3.40 Each
NZ$ 3.91 incl GST

185 in stock

In Stock
OKOOKO Slat Holder 53mm Single Pin

OKOOKO Slat Holder 53mm Top Fitting Single Pin. Branded slat holder 'Okooko' no longer sold in New Zealand. Brand new - never used. Colour gunmetal grey. Special Price 60+ units.

NZ$ 3.00 Each
NZ$ 2.00 Each
NZ$ 2.30 incl GST

305 in stock

In Stock
Slat Cap 53mm Black 35mm Pin Centres

Slat Cap 53mm Black 35mm Pin Centres

NZ$ 3.00 Each
NZ$ 3.45 incl GST

6 in stock

In Stock